Minimise your compressor's operating cost with AIR-KOOL
The AIR-KOOL Unit
The AIR-KOOL unit is piped into the compressor system between the after cooler and the oil and water separator.
In a closed cooling circuit the compressed air is cooled to +2° C to +8° C resulting in a decrease in pressure drewpoint.
The cooled compressed air is discharged to the compressor's final oil and moisture spearator to be dispelled by the automatic drain.
As a result the adsorbent packed filter cartrigde is exposed to approximately one sixth of the moisture it would be exposed to without AIR-KOOL.
Filter cartridge life is increased six hundret precent by AIR-KOOL.
Technical Data
| Dimensions (L × W × H): |
660 mm × 380 mm × 360 mm |
| Weight: |
46 kg |
| Pressure range: |
120 bar (1740 psig) up to 420 (6100 psig) / 500 bar (7250 psig) |
| Ambient temperature: |
+5°C up to +45°C, indoors only |
| Air flow: |
100 l/min (3,5 scfm) up to 600 l/min (21 scfm) |
| Power consumption: |
0,8 kW |
| Power supply: |
230 V / 50 Hz *
115 V / 60 Hz * |
* Other voltages require superposed transformer (special accessory) for smooth operation.
Technical Data
- Dimensions: L 68 cm × H 40 cm × W 50 cm
- Refrigeration unit: power supply 800 W
- Operating temperature: +5°C to +45°C ambient temperature
Who can use AIR-Kool
Our super silent units are designed for an AIR-KOOL module.

An autonomous AIR-KOOL module can be connected to mobile units and open design units.
|